Envelope temperature in real time
Connect a Ruuvi Tag or Hotair Bluetooth sensor. WindXplorer displays envelope temperature in real time on the map, triggers an alert before the threshold, and records flight telemetry.
Real-time, in flight
All BLE measurements integrate into the flight interface without leaving the map.
Pill on the map
Temperature displays continuously on the Track map, visible at all times during the flight.
Instrument bar
Visible in the top instrument bar, even when the map is minimised.
Configurable alert
Set a threshold. WindXplorer vibrates and shows a visual warning as you approach the limit.
Recorded telemetry
Temperature is logged point-by-point in the flight. Review the curve after landing.
Open BLE
No pairing, no third-party app. The sensor broadcasts openly; WindXplorer listens in the background.
Simulation mode
No sensor? Enable simulation mode to test the interface without hardware.
Threshold alert
Automatic trigger
WindXplorer triggers the alarm as soon as temperature reaches the configured threshold. The alert is visual (red flash on the pill) and haptic on iOS and Android.
The threshold is adjustable in Temp probe → Temperature alert. Typical value: 105 °C for most Nylon 6.6 envelopes.
Supported sensors
Any BLE sensor broadcasting in non-connected mode is compatible. Two tested sources:
Native BLE, no pairing
Experimental Web Platform features
Open BLE broadcast
Same condition as Ruuvi
Built-in virtual sensor
Also on mobile web
For Chrome on Web: enable chrome://flags/#enable-experimental-web-platform-features. On the iOS/Android app, BLE scanning works in the background throughout the flight.
About the Ruuvi Tag
An open source, robust and precise sensor
The Ruuvi Tag is a BLE environmental sensor developed in Finland, open source, powered by a CR2477 battery. It measures:
- Temperature — accuracy ±0.3 °C, range −40 to +85 °C
- Relative humidity — accuracy ±3 % RH
- Atmospheric pressure — 500 to 1,250 hPa
- Battery voltage — remaining level indicator
- Open BLE broadcast — no pairing, range ~10–30 m depending on obstacles
Available at ruuvi.com — around €30. Ideal for monitoring envelope temperature or ambient temperature on the ground before inflation.
Try the temperature probe
Simulation mode is available without a physical sensor — enable it from the Track tab.